Sump Pumps, Septic Pumps and Parts
On this page, you will find submersible and pedestal sump pumps, discharge hose kits and check valves. Also listed are dosing pumps which may be used as heavy duty sump pumps.
139.00
Everbilt pedestal sump pumpSKU 37-001$139.00139.00
Everbilt 1/3 HP Pedestal Sump Pump is designed to remove water from a basement sump pit.
Fits in 12" diameter or larger sump pit
Thermoplastic corrosion-resistant construction
115-Volt PSC motor
Fully adjustable automatic switch
Maximum lift at 20 ft.
1-1/4" NPT discharge
8 ft. power cord
1 Year Limited Warranty
read more ▼
219.00
Zoeller M73 1/3HP submersible sump pumpSKU 37-007$219.00219.00
Zoeller M73 1/3HP 115V submersible sump pump.
•Oil-filled, hermetically-sealed motor with automatic reset thermal overload protection
•Rugged, cast iron motor housing with corrosion-resistant, baked-on enamel finish
•Efficient heat sink for heat dissipation
•Engineered plastic base and pump housing with no screen
•Passes 3/8” (9 mm) spherical solids
•Reliable integrated vertical switch
•Carbon and ceramic rotary seal
•Watertight, NBR rubber seal between motor and cover
•Stainless steel screws and hardware
•Temperature rating: 104 °F (40 °C)
•On point: 6-1/2” (16.5 cm)
•Off point: 2-1/2” (6.3 cm)
•Maximum width: 8-3/32" (21 cm)
•Maximum height: 11" (27.9 cm)
•Weight: 12.4 lbs (5.6 kg)
•Fits 12" (30 cm) diameter pits
read more ▼
344.18
Zoeller M75 1/2 HP submersible sump pumpSKU 37-012$344.18344.18
Zoeller M75 1/2HP 115V submersible sump pump.
•Oil-filled, hermetically-sealed motor with automatic reset thermal overload protection
•Rugged, cast iron motor housing with corrosion-resistant, baked-on enamel finish
•Efficient heat sink for heat dissipation
•Engineered plastic base and pump housing with no screen
•Passes 3/8” (9.5 mm) spherical solids
•Reliable integrated vertical switch
•Carbon and ceramic rotary seal
•Watertight, NBR rubber seal between motor and cover
•Stainless steel screws and hardware
•Temperature rating: 104 °F (40 °C)
•On point: 8-1/3” (21 cm)
•Off point: 2-1/2” (6.3 cm)
•Maximum width: 8-3/32" (21 cm)
•Maximum height: 12-3/8" (31.4 cm)
•Weight: 16.5 lbs (7.5 kg)
•Fits 12" (30 cm) diameter pits
•100% factory tested after assembly
read more ▼
291.00
M57-E Zoeller 115v, 1/3 hp dosing pumpSKU 37-525$291.00291.00
M57-E Zoeller 1/3 hp, 115v, effluent and dewatering pump, 1 1/2 discharge, automatic float, passes 1/2" solids, 3 year warranty
read more ▼
353.28
N57 Zoeller 115v, 1/3 hp dosing pumpSKU 37-526$353.28353.28
N57 Zoeller 1/3 hp, 115v, effluent and dewatering pump, 1 1/2 discharge, non-automatic
read more ▼
378.24
N98 Zoeller 115v, 1/2 hp dosing pumpSKU 37-530$378.24378.24
N98-B Zoeller 1/2 hp, 115v, effluent and dewatering pump, 1 1/2 discharge, non-automatic, passes 1/2" solids, 3 year warranty
read more ▼
470.93
E98 Zoeller 230v, 1/2 hp dosing pump SKU 37-531$470.93470.93
E98 Zoeller 1/2 hp, 230v, effluent and dewatering pump, 1 1/2 discharge, non-automatic, passes 1/2" solids, 3 year warranty
read more ▼
754.65
N140 Zoeller 1 hp effluent pumpSKU 37-545$754.65754.65
N140 Zoeller 1 hp, 115v, effluent pump, 1 1/2 discharge, non-automatic, passes 1/2" solids, 1 year warranty
read more ▼
52.00
24" sump pump basin with lidSKU 37-090$52.0052.00
Baughman SW24 24" deep x 15 1/2" inside diameter plastic sump basin with lid
read more ▼
52.00
Flotec 115v mechanical float switchSKU 37-127$52.0052.00
Flotec 115v mechanical tethered float switch for sump pumps or sewage pumps up to 1/2 hp, 9' flexible cord operates in sump basins 14" or wider
read more ▼
157.00
double float pump switch, 120VSKU 37-630$157.00157.00
Average rating:
double float mercury pump switch, 120V, 15' cord with plug, SJE-Rhombus 1002022
read more ▼
139.60
double float pump switch, 230VSKU 37-631$139.60139.60
double float mercury pump switch, 230V, 15' cord with plug, SJE-Rhombus 1002024
read more ▼
42.00
watertight pvc box w/5 connectorsSKU 37-650$42.0042.00
4 x 4 x 4 watertight pvc junction box without knockouts; includes five watertight box connectors
read more ▼
45.10
Channellock 909 crimping and cutting pliersSKU 83-260$45.1045.10
Channellock 909 crimping and wire cutting pliers, 9 1/2 inches long, for 22-10 AWG wire
read more ▼
14.45
7" plastic tie lock strap, 50lb, bag of 100SKU 36-504$14.4514.45
Average rating:
Thomas & Betts L750MHOC 7" black UV and weather resistant cable ties, 50 lb tensile strength, bag of 100
read more ▼
25.52
15" plastic tie lock strap, 50lb, bag of 100SKU 36-505$25.5225.52
DiversiTech 15" black cable ties, 50 lb tensile strength, bag of 100
read more ▼