Stainless Steel Threaded Fittings and Threaded Nipples

This fitting has female thread that connect onto two pieces of threaded pipe to form a 90 degree angle.

This fitting has male threads on one end and female threads on the other end and forms a 90 degree angle.

This fitting connects two pieces of threaded pipe to form a 45 degree angle.

This fitting conneccts three pieces of threaded pipe to form tee branch.

Reducing tees are measured end x end x center branch.

This fitting connects two pieces of male threaded pipe (or fittings).

This fitting connects two pieces of male threaded pipe (or fittings) of different sizes.

This fitting caps a piece of threaded pipe

This fitting screws into a female fitting.

This fitting screws into a female fitting of the larger size and connects a male threaded fitting or pipe on the smaller size.

This fitting connects two pieces of pipe and allows the connection to be taken apart and put back together.

Stainless Steel Nipples 1/8"

Stainless Steel Nipples 1/4"

Stainless Steel Nipples 3/8"

Stainless Steel Nipples 1/2"

Stainless Steel Nipples 3/4"

Stainless Steel Nipples 1"

Stainless Steel Nipples 1 1/4"

Stainless Steel Nipples 1 1/2"

Rigid 31005 8" cast iron pipe wrench, 1" jaw capacity

for threaded metal or plastic connections, -50 to 400 degree F, gases to 3000 psi and liquids to 10000 psi

for threaded metal or plastic connections, -50 to 400 degrees F, gases to 3000 psi and liquids to 10000 psi