S&D Gasketed
SDR 35 Gasketed
Gasketed PVC sewer main has a gasket in every hub to seal the connections. |
Published prices are applicable to our quantities on hand at the time of publication. Prices are subject to change. |
Sewer and drain pipe and fittings
Full joints are actually 14' overall including the bell. When assembled, each full joint adds 13' to 13' 2" overall.
If you order cut pieces by the foot, specify the length of the piece in the shopping cart. Enter multiple items for each cut piece.
Note, UPS can not ship lengths over 8 feet, so if you order the full joints or a length over 8 feet, it has to be picked up in the store.
Bends are expressed in degrees: 90 = one-fourth, 45 = one-eighth, 22 = one-sixteenth.
SDR = standard dimensional ratio, is the ratio of diameter to wall thickness.
Gasketed sewer main has the same diameter and wall thickness as regular SDR-35 pipe. |
||||||||
|
"Hub" means female; pipe slips into it; and it has a gasket and the same inside diameter as a bell end.
"Fitting" means male; it inserts into a hub or bell end; and it has same diameters as pipe.