PVC -DWV Schedule 40 Fittings

These couplings have a center stop and attach two pipes together.

These couplings have a center stop and reduce from larger pipe to a smaller pipe size.

Used to connect schedule-40 to sdr-35 or s&d pipe.

to connect schedule-40 to sdr-35 or s&d pipe.

Bushings insert into a fitting's hub & accept a smaller pipe.

These are 90 degree angle ells (1/4 bend). Long sweeps have a longer or sweeping radius.

These are 90 degree angle ells with a hub (socket) on one end and a (male spigot) pipe size on other end to insert into another hub fitting. (1/4 bend)

These ells make a 90 degree angle (1/4 bend) on the main size pipe while accepting a smaller size pipe into the heel or side for a vent or another drain.

These are 60 degree angle ells (1/6 bend) with hubs (sockets) on each end.

These are 45 degree angle ells (1/8 bend) with hubs (sockets) on either end to accept pipe.

These are 45 degree angle ells (1/8 bend) with a hub (socket) on one end and a male (spigot) pipe size on other end.

These ells make a 22 1/2 degree angle (1/16 bend) with hubs (sockets) on either end to accept pipe.

These are sanitary tees where the branch (middle) sweeps into the main line. Has all hub (female socket) connections.

These are sanitary tees where the branch (middle) is a smaller size but still sweeps into the main line . All are hub (socket or female) connections.

Wyes have a center branch that enters the main line at a 45 degree angle. All are hub (socket or female) connections.

These reducing wyes center branch is smaller than the main line and enters at a 45 degree angle. All connections are (female socket) hub.

combo wye and 1/8 bend where center branch enters main line at a 45 degree angle after a long sweep. All ends are hub (female socket) connections.

Double tees accept four pipes in the shape of a cross. All connections are hub (female socket).

Reducing crosses and double wyes accept four pipes where the branch pipes are smaller sizes than the main line.

Male adapters have mipt on one end and hub (female socket) connections on the other end.

Female adapters have female (fipt) threads on one end and hub (female socket) connection on the other end to glue over PVC pipe.

Cleanout adapters have female (fipt) threads on one end and glue into another PVC fitting on the other end.

Male (mipt) threaded plugs are used in female adapters or cleanout adapters to provide access to clear clogged drains.

commonly used to cap off a pipe stub; normally solvent welded (glued) in place.

Walrich 1836202 dual test cap for 1 1/2 and 2" PVC sch 40 pipe

Walrich 1836204 dual test cap for 3 and 4" PVC sch 40 pipe

Trap adapters, or desancos, attach to tubular plastic or chrome traps with a compression slipnut and glue over PVC pipe (hub) or into another PVC fitting.

Saddles may be attached to a main line where an add-on branch is needed. Mark hole to be drilled, glue on the saddle and install retaining brackets.

spigot type flange solvent welds directly into a hub of a fitting such as an elbow or tee; other styles have a hub to connect to pipe (or a street fitting)

P-Traps can be used for showers, tubs etc. to keep odors from entering back through the pipe. Union P-Traps can be taken apart.

2" sch40 pvc spring-loaded in-line check valve, glue sockets, lead free, 304 stainless steel spring, EPDM seal, maximum working pressure is 100 psi at 73F (23C), maximum temperature is 140F (60C)

Backwater flapper type PVC check valve prevents water from coming back up the drain into your building. There is a cleanout access on the top of the valve.

Valterra 6301 3" pvc gate valve with plastic slide paddle, 3" pvc sch40 pipe glues into either end, 30 psi

Valterra 6401 4" pvc gate valve with plastic slide paddle

4" plastic animal guard attaches to the end of any 4" drain pipe, allows water to pass but keeps rats and muskrats from entering the pipe

6 inch plastic animal guard attaches to the end of any 6" drain pipe, allows water to pass but keeps rats and muskrats from entering the pipe

replaces rusted or broken flange

The Clam stainless steel closet ring replaces rusted or broken flanges on existing plastic closet flanges, made in the USA of 409 stainless steel

for rusted out cast iron toilet flanges

1 1/2 Auto plumbing vent has male threads. Air is allowed to be drawn into vent line but does not allow odors back into room.

with rubber boot

with rubber boot

with rubber boot

with rubber boot

Tuf-Tite TR1 36" long x 6 3/4" wide x 5" deep plastic trench drain with ADA grate, snap together units, includes trough, grate, snap-on end caps and knockouts for 2, 3 or 4 inch pipe, 235 psi.

Tuf-Tite 2HDS-1 11" long x 11" wide x 15 1/2" deep 2 hole plastic drain sump with black grate, includes three seals: one yellow seal for 4" sdr35 or S&D pipe, one yellow seal for 4" sch 40 pipe and one orange plug seal

Tuf-Tite 2HDS-4 16" long x 16" wide x 15" deep 2 hole plastic drain sump with black grate, includes three seals: one yellow seal for 4" sdr35 or S&D pipe, one yellow seal for 4" sch 40 pipe and one orange plug seal