Brass Ball valves, Boiler Drains, Lawn Faucets, Stop and Waste valves and more.

These high quality lead-free brass 1/4 turn threaded ball valves are full port and rated 600 psi for WOG (Water, Oil and Gas).  WSP (working steam pressure) 150 psi.  Temperature rating -20 to 300 degrees F (-28 to 150 C), PTFE (polytetrafluoroethylene) packing and seat.

These high quality lead-free brass 1/4 turn copper to copper sweat (solder) ball valves are full port and rated 600 psi for WOG (Water, Oil and Gas).  WSP (working steam pressure) 150 psi.  Temperature rating -20 to 300 degrees F (-28 to 150 C), PTFE (polytetrafluoroethylene) packing and seat.

This is a 150 psi copper x copper sweat (solder) Stop and Waste valve for water. It is usually used to prevent damage to the pipe from freezing. Remove the waste cap on the side of the valve to drain the water from the pipe back to the valve. Maximum temperature rating is 180 F (82 C), PTFE gland packing, NBR rubber seat.

This lead free brass boiler drain valve has a male thread on one end and a 5/8" male garden hose thread on the other. This valve has many uses beside a drain for your boiler. It can be used to replace a water heater drain, as a cheap outdoor faucet, shut-off valves for a washing machine and more. Maximum temperature is 180 F (82 C), pressure rating 150 psi.